When the inside gets hot and sticky, this 15,000 Btu Furrion Chill HE system drops the temperature fast. Dual motors drive airflow more efficiently than single-motor units, pushing cool air through both ducted and non-ducted setups. The R32 refrigerant keeps it compliant with 2025 EPA standards while maintaining solid performance. With an energy efficiency ratio of 7.1 and a running draw of 15.8 amps, it balances cooling power with steady efficiency.
Voltage dips happen when everyone’s plugged in or when a generator can’t quite keep up. The built-in start capacitor stores a power reserve that gives the compressor an extra jolt when it needs it most, helping the unit start smoothly even on limited power. Once it’s running, that stored energy is ready to go again for the next startup—no tripped breakers or failed restarts to deal with.
Getting comfortable at night shouldn’t mean giving up peace and quiet. The sleep setting cuts noise and saves power while keeping the air at your ideal temperature. You can dial in your comfort between 60°F and 86°F using the wall-mounted digital thermostat with clear readouts and easy controls. Automatic restart remembers your settings after a power interruption so you don’t have to reset everything each time.
This system is engineered for the road with layers of protection that keep it performing trip after trip. Rubber dampeners on the compressor reduce vibration and noise, while the UV-resistant cover shields internal components from water and debris. Inside, EPP foam housing resists water and chemicals, and thermal insulation helps prevent overheating during long runs. Removable filters make cleaning easy so airflow stays strong without buildup.
Installing or upgrading is simple thanks to bolt-on mounting and included hardware for the air distribution box. EVA foam seals against the ceiling to prevent leaks, and adjustable registers let you direct air exactly where you want it—or close them off to push more through the ducts if you’re using a ducted setup. It’s everything you need in one complete AC system ready to mount and run on 115V power.
Ratings & Reviews
Noisier than the Atwood I replaced
Loved the air conditioner. It was quieter and took less power than the old one. The only problem was where the temperature sensor was located. I had to cut the wire and remotely mount it.
All parts arrived. No issues, blows cold air has very strong fan.
I had Cornerstone Rv Repair located in Porter TX come out and install this for me. They were impressed with it and complimented it's ease of installation. Will need to see how it holds up against summer sun and heat here in southeast Texas. Looks very good on top of my trailer.
Unit failed 2 months after installation. Warrantee did not help. Really there isn't one because you have to do everything for their failure. This means I would have to uninstall and drive some place for them to do warrantee. Not realistic to leave a whole in your roof because they can't send someone out to see that their unit was crap
Great folks!! When I have questions, y’all have the answers.
Have not installed yet, but as far as the purchase and shipping, everything came in perfect condition and arrived 9 days earlier than initially expected.
Great unit and easy to install
After a years service, this unit has become problematic. Went from being fairly quiet to just plain loud at 74db on low. Some features we appreciate are the heat / cooling relay system which consolidated our heater and cooling Thermostat. But, that's about it. Fairly poorly engineered because air distribution is not even front to back (blows more air out the back of the distributer). Vibration is about as bad as what we had. We are looking for a better solution. Just about as terrible (but not quite) as the Dometic it replaced.
Easy installation, runs smooth and less noise that our previous one
Runs good, not hard to install
eTrailer shipped the units very quickly and they arrived in excellent shape. Installation instructions were hard to locate, but this is not an issue with eTrailer. Just note Furrion only includes brief instructions with the units and you have to reference online manuals for more details.
I was replacing two Coleman Mach 15 units and installation was fairly straight forward. If you are replacing a unit, keep in mind you have to have 12 volt power going to the ceiling unit. My RV did not have 12 volt. I had two options.. 1). Use some of the thermostat wires to pass 12 volt to the ceiling or 2). Install a converter from the ceiling 120v. Due to the gague of the thermostat wire, I opted to install a 120v to 12v converter using the ceiling feed. These are fairly cheap online and simple to install.
The Furrion units themselves are excellent. They have a lot more power than my Coleman units, even though the BTU is slighly less.
My main issues with the units:
1). The thermostat backlight does not automatically turn on. You have to push a button before the backlight comes on and you end up changing a function or messing the temp up. This is annoying.
2). The included ADB in the package I purchased create a lot of noise. It is noisy when the dump vent is closed and sounds like you are in the middle of a tornado when the dump vent is open.
My low rating is mainly due to the ADB. I will have to purchase a different ADB or find some type of modification. The noise is high, even with the vent closed.
Arrived on time! I purchased as a new second unit from etrailer because the unit came with a soft startup and all the required components. I was going to purchase from Camping World because the price was cheaper, but after digging deeper, Camping World delivered everything separately and didn't come with soft start up. So, etrailer's price ending up being about the same. Installation was easy. Screws were missing from the thermostat to install on the wall and screws were missing from the control unit to attach it to the distribution box. Make sure when installing the 4 screws to secure the unit that they are torqued to 50lbs. Haven't put it to the test yet, but it blows some cold air!!!
Desiring to improve the ability to cool the rig by adding a second AC installed using the bedroom vent opening configured as a stand-alone zone we choose the Furrion Chill HE kit. A secondary goal is to have an AC unit that can be utilized during BLM camping with our small inverter-generator to cool the bedroom. The FR85PV kit enables both goals and it is easy to install. I bench-tested the unit prior to mounting the AC unit on the rig. The Chill provides output air at 48.6 degrees F while drawing 9.1 amps in the run state. Inrush current was 44.5 amps. I had concern for the thermostat placement to prevent AC output air fooling the thermostat in a small room. I learned that the thermostat is a control point and not a temperature sensing point. The temperature displayed on the thermostat is acquired by a sensor in the return air duct opening.
I suggest two points of emphasis while installing the kit. First, take your time installing the two-piece divider that separates the cold air out chamber from the return air chamber. Ensure you have a good seal between the two chambers. Second emphasis involves the room temperature sensor in the air return chamber. The sensor is a short lead wire – I bent my lead in an L shape and pointed the sensor upwards into the room air return duct and away from the unit’s wire bundle to achieve the best sensing location.
The product is well made and installation is a breeze with good design and everything needed is included. Will definitely be installing more of these.
easy install except put it on the roof.
Shipped on time in great condition. All correct parts and easy installation.
Great service! Fast delivery.
The instructions did not explain which terminals to connect to which wire. Talked to one your reps and she attempted to find out but was unable. Finally after an hour of Internet searching, I found my answer. Very happy with the unit itself.
Great customer communication and servic es.
best on the market, very cold and quiet
Sara at etrailer made this purchase so easy. She got some basic information and immediately had a full kit available for us to purchase. I needed everything in the kit and nothing more. Couldn’t ask for better service. You’ve won a future repeat customer!
The etrailer youtube videos didn't help with more than setting up the install. Once we got to the wiring, we had to hire an RV tech to handle that piece since there were no resources to help us with that part for the kit we got.
Do you have a question about this RV Air Conditioner?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.